Pool & Spa Safety Inspection
The full barrier check against the VBA standard — same-day Form 23 where your Fraser Rise pool or spa is compliant.
$250 flat
Pool Re-Inspections · Fraser Rise
Pool Failed Its Inspection in
Fraser Rise?
If your Fraser Rise pool or spa barrier didn't pass first time, the fix is usually smaller than it sounds — often the non-climbable zone measurement on a compact lot, or gate hardware that needs adjusting. The follow-up visit from Ryan Gaw, VBA-registered Pool Safety Inspector (IN-PS 100055), is free. Sort what's on your Non-Conformance Report and call 0402 860 499; pass, and your Form 23 is signed and issued the same day — lodging it with Melton City Council within 30 days is then yours to do.
- Re-inspection
- Free once listed items are fixed
- Turnaround
- Same-day Form 23 once your barrier passes
- Inspector
- Ryan Gaw · VBA-registered · Licence IN-PS 100055
Rated 5.0★ · Google reviews
In Short: A failed first inspection in Fraser Rise usually comes down to a tight non-climbable zone measurement on a compact lot, or gate hardware left at a generic builder setting. Fix what's listed, book the follow-up, and it's free. Pass, and your Form 23 is signed and issued the same day; lodging it with Melton City Council within 30 days is on you as the owner.
Fraser Rise · Melton City Council
What Happens After a Pool Fails Inspection in Fraser Rise?
A failed first inspection isn't a penalty and it doesn't sit on any public record — it's a to-do list. Fraser Rise's compact-lot layout produces a fairly consistent version of it:
- You receive a Non-Conformance Report naming each item that failed and the clause it breached
- You arrange the fix — often shifting something clear of the non-climbable zone, sometimes a gate hardware adjustment
- You call 0402 860 499 and we book the free re-inspection
- If everything on the list now passes, your Form 23 is signed and issued that same visit
If you already have a Non-Conformance Report from us, always come back for the free re-inspection rather than booking a fresh full inspection. Still planning the build? A compliance consultation is the better starting point.
Local knowledge
Why Fraser Rise Barriers Fail First Time
Fraser Rise's compact lots and swim spa mix produce two related failure patterns:
- Climbable objects inside the 900mm non-climbable zone — more common here than on larger blocks, simply because there's less margin between the barrier and neighbouring structures.
- Gate not self-closing or self-latching from any position — the same generic-builder-setting issue seen across Melton's newest estates.
Both are usually quick fixes once identified. Neighbouring Weir Views and Cobblebank share the hardware pattern with fewer compact-lot clear-zone issues.
Deadlines
How Long Do I Have to Fix a Failed Fraser Rise Inspection?
No statutory clock runs against a Non-Conformance Report by itself. What matters is settlement timing: a Form 23 must be issued inside a 90-day window before a sale goes through, so if a swim-spa or plunge-pool barrier failed close to a scheduled sale, get onto the repair early. Otherwise there's no cost or penalty attached to taking the time you need.
Melton City Council
Who Lodges the Form 23 After a Fraser Rise Re-Inspection?
Nothing gets reported to Melton City Council while your barrier is still failing — the process only kicks off once it genuinely passes. When the re-inspection confirms the swim-spa or plunge-pool barrier is fixed, the Form 23 is signed and issued on the day, and lodging it with council within the statutory 30-day window is on you from there.
If you're near the Wyndham boundary and unsure which council your address falls under, confirm that before lodging — the Melton City Council compliance guide and Form 23 certificate guide both cover the process, and our property-sale service handles the 90-day settlement timeline if that applies.
Services in Fraser Rise
Pool Compliance Services in Fraser Rise
Flat $250 — same-day Form 23 where compliant, free re-inspections, no hidden fees.
Compliance Consultation
Planning your pool or swim spa build in Fraser Rise? Get the barrier right before it goes in.
$250 flat
Pre-Sale Compliance Certificate
Form 23 issued inside the 90-day window a Fraser Rise property sale needs.
$250 flat
FAQ
Fraser Rise Re-Inspection FAQs
How soon after repairs can you come back for the re-inspection in Fraser Rise?
Usually within a week. Fraser Rise is on our regular Melton-area circuit, so calling once your Non-Conformance Report items are resolved gets you into the next available run.
Does a Fraser Rise re-inspection cost anything?
No, it's covered under your original $250 Fraser Rise inspection, swim spa or full pool alike. A separate fee only kicks in for a genuinely new booking later on.
What does the re-inspector actually recheck in Fraser Rise?
Only what's named on your Non-Conformance Report. On Fraser Rise's compact lots that's often the non-climbable zone measurement, alongside the usual gate hardware check — we recheck exactly what's flagged, not the whole barrier.
I moved the item that was encroaching on the clear zone — is that enough to pass?
Usually, yes, if that was the only issue named on your report. We measure the clear zone again at the re-inspection to confirm it's genuinely clear given how tight compact-lot margins can be.
Is there a deadline to fix things before I have to pay again in Fraser Rise?
The $250 fee doesn't come with a built-in expiry. The one deadline worth watching is a property sale, since the Form 23 must be issued within 90 days of settlement.
Nearby
Re-Inspections in Nearby Suburbs
Same flat $250 across our entire service area.