Pool & Spa Safety Inspection
Full barrier check against the VBA standard, with a same-day Form 23 where compliant.
Same-day Form 23 across the western corridor — Werribee, Point Cook, Tarneit, Truganina, Hoppers Crossing, Wyndham Vale, the Melton Shire heart at Melton, Melton South, Melton West, Kurunjang, Brookfield, Cobblebank, Fraser Rise and Weir Views, plus the Moorabool fringe at Bacchus Marsh and Darley. Ryan Gaw, VBA-registered Pool Safety Inspector (IN-PS 100055), runs a flat $250 all-inclusive fee across the whole corridor — no travel surcharge, no per-suburb pricing. Call 0402 860 499.
Inspections across the western corridor are carried out by Ryan Gaw, the VBA-registered Pool Safety Inspector (Licence IN-PS 100055) behind Local Pool Inspections — from Wyndham's rapid-growth estates in Tarneit and Truganina, through Melton Shire's own growth corridor at Cobblebank, Fraser Rise and Weir Views, to the established core of Werribee and Melton and out to the Moorabool fringe at Bacchus Marsh.
Same-day Form 23 across the western corridor — Werribee, Point Cook, Tarneit, Truganina, Hoppers Crossing, Wyndham Vale, the Melton Shire heart at Melton, Melton South, Melton West, Kurunjang, Brookfield, Cobblebank, Fraser Rise and Weir Views, plus the Moorabool fringe at Bacchus Marsh and Darley. We specialise in one corridor rather than trying to cover the whole of Melbourne's west, spanning three councils — Wyndham City, Melton City Council and the Moorabool fringe. That's where we run same-day bookings most weeks, know each council's specific process, and have inspected enough barriers across all three to spot the recurring failure patterns before we even open the gate.
If your property sits further into inner or northern Melbourne, call us anyway — we can usually point you toward the right process even outside our direct run. But for the western corridor specifically, this is the specialist page: same flat $250 all-inclusive fee as our Geelong service area, same-day Form 23 where compliant, free re-inspections.
Wyndham's growth suburbs are almost the mirror image of an established area like inner Geelong. The barrier is modern, the fencing is compliant stock, and the non-climbable zone is usually clear — new estates just don't have decades of garden growth encroaching on the fence line. What fails instead is hardware that was never correctly set up at handover.
In Tarneit, Truganina and Point Cook specifically, the most common first-inspection issue is a self-latching gate that was installed but never adjusted — the fencer set the spring tension for a fully open swing at handover, and it's never been tested from the cracked-open position the standard actually requires. Most of the time, adjusting or replacing that spring is the whole fix.
Melton Shire's own growth corridor — Cobblebank, Fraser Rise and Weir Views (linked below in our full suburb coverage) — sees almost exactly the same pattern: gate hardware left at a generic builder or factory setting rather than genuinely adjusted for the pool standard, not hardware that's worn out. It's the same underlying issue as Wyndham's new estates, just a different council on the other side of the boundary.
If you've just moved into a new-build with a pool, watch this one: a Form 22 occupancy permit from the building surveyor is not the same as a Form 23. Occupancy clearance and the statutory pool barrier inspection are two separate processes — a pool that received its occupancy permit still needs its own Form 23 from a VBA-registered inspector before the four-year cycle starts.
In the older parts of Melton Shire — Melton itself, Melton West, Kurunjang and Brookfield (also linked below) — the pattern flips to look more like Wyndham's established core: barriers that have been in the ground long enough for original gate hardware to genuinely wear out, rather than a handover-stage setting issue.
Further out in Bacchus Marsh and Darley, the pattern shifts again — larger rural-residential blocks and township-era stock mean gate hardware and boundary-fence sections are the more common checkpoints, closer to what we see in established Geelong suburbs than in the newer growth estates further east.
Wyndham City Council, for Werribee, Point Cook, Tarneit, Hoppers Crossing and Wyndham Vale. Registration and Form 23 lodgement both run through Wyndham's online T1Cloud portal — a genuinely different system, fee structure and lodgement channel from the City of Greater Geelong's process, so don't assume the two councils work the same way if you've dealt with one before. The full breakdown — registration fee tiers, the portal, the 4-year cycle and what a non-compliance notice actually costs in Wyndham — is on our Wyndham City Council compliance guide.
Truganina is the one address in this corridor worth double-checking: it genuinely straddles the Wyndham/Melton council boundary, and Fraser Rise sits right on the Melton side of that same line. Rather than guess from a street name, check your rates notice or your property's council listing to confirm which authority your specific address falls under before you register.
Across the shire boundary at Melton, Melton South, Melton West, Kurunjang, Brookfield, Cobblebank, Fraser Rise and Weir Views, registration and Form 23 lodgement both run through Melton City Council instead — a genuinely separate process from Wyndham's, with its own portal and fee schedule. The full breakdown for all eight suburbs is on our Melton City Council compliance guide.
Out at Bacchus Marsh and Darley, registration runs through Moorabool Shire instead. Our Moorabool Shire compliance guide covers what's confirmed at the statewide statutory level and what to check directly with the shire.
Wherever you sit in the corridor, once your barrier passes we issue the Form 23 the same day — you then lodge it with the correct council yourself, within 30 days.
Yes. Under the Building Act 1993 (Vic) and the Building Regulations 2018, every Victorian property sale with a pool or spa over 300mm deep needs a current Form 23 attached to the Section 32 vendor statement before settlement — that applies exactly the same way in Werribee or Point Cook as it does anywhere else in Victoria, including across Melton Shire. Wyndham's and Melton's shared rapid growth means a lot of the sales we see through this corridor involve near-new pools, which usually clear inspection quickly once the gate hardware is checked and adjusted.
Book your inspection ahead of listing, not after you're already under contract. If a barrier fails first time, remediation and re-inspection typically takes one to two weeks — comfortably inside a normal settlement window if you've started early. See the full pool inspection for property sale service page for what to prepare either as a vendor or a buyer.
Same Form 23 lodgement, same $250 flat fee, right across the corridor.
Established mixed stock, high rental share. The usual fails: ageing original gate hardware hitting its first re-certification cycle.
New-estate stock. The usual fails: a self-latching gate never adjusted after builder handover.
Mixed-age housing stock. The usual fails: original gate hardware wearing past its working life.
New-estate stock. The usual fails: gate hardware left at a generic builder or handover setting.
Township heritage stock plus growth estates. The usual fails: gate hardware and boundary-fence sections.
Flat $250 — same-day Form 23 where compliant, free re-inspections, no hidden fees.
Full barrier check against the VBA standard, with a same-day Form 23 where compliant.
Form 23 issued inside the 90-day window a western-corridor property sale needs.
New-estate handover check or planning a new pool? Get the barrier right before you build it.
Our swimming pool compliance checklist walks through the same five checkpoints — gate self-closing, non-climbable zone, fence height, latch height, gaps — that we measure on every formal inspection. It's a 20-minute walk around your fence that tells you what's likely to trip up a first inspection in a new-estate Wyndham or Melton pool, before you book.